ezCAN Extension Kit for BMW/ Harley Davidson/ KTM Bikes

£40.00 ex VAT

The HEX ezCAN Extension Kit provides you with everything that you need to connect your front auxiliary lights, brake lights and horn to the ezCAN, with additional connectors to facilitate other accessories.

The kit contains:

  • 2 x 1.5m 3-core extension cables (typically used for 2-wire or 3wire front accessory lights)
  • 1 x 0.5m 3-core extension cable (typically used for brake lights)
  • 1 x 1.5m 2-core extension cable with spade connectors on one end (typically used to connect air horns or other 2-wire accessories)
  • 3 x female MT-3 connector kit including pins and wire seals
  • 5 x male MT-3 connector kit including pins and wire seals
  • 5 x blanking seals (where only 2 terminals are used in a 3-wire connector)
  • 6 x 20mm adhesive lined Heat-shrink
  • 2 x female spade connector terminals (6.3mm)
  • 1m Sheathing
Share on facebook
Share on twitter
SKU: H1-EXT-004
SKU H1-EXT-004 Category

Description

The HEX ezCAN Extension Kit provides you with everything that you need to connect your front auxiliary lights, brake lights and horn to the ezCAN, with additional connectors to facilitate other accessories.

The kit contains:

  • 2 x 1.5m 3-core extension cables (typically used for 2-wire or 3wire front accessory lights)
  • 1 x 0.5m 3-core extension cable (typically used for brake lights)
  • 1 x 1.5m 2-core extension cable with spade connectors on one end (typically used to connect air horns or other 2-wire accessories)
  • 3 x female MT-3 connector kit including pins and wire seals
  • 5 x male MT-3 connector kit including pins and wire seals
  • 5 x blanking seals (where only 2 terminals are used in a 3-wire connector)
  • 6 x 20mm adhesive lined Heat-shrink
  • 2 x female spade connector terminals (6.3mm)
  • 1m Sheathing